Skip to main content
A house being rebuilt on a sloped California lot, new wood stud walls and roof trusses on a fresh concrete slab with a stepped concrete stem wall, lumber stacks and orange safety fencing along the sidewalk in harsh midday sun
for realtorscalifornia lawinsurancehome buyers

SB 876: The 50% Rebuild Offer Starts in 2028, Not 2027

By Danielle Osei, Senior Inspector (InterNACHI-certified)··13 min read

The 50 percent offer is real, but it starts in 2028

Buyers ask us during inspections whether the new insurance law means their policy will cover a full rebuild. We tell them the date first. SB 876 was approved on September 27, 2026, but its coverage requirements become operative January 1, 2028.

That leaves a useful window for a buyer in escrow. Ask for the insurer’s written rebuild estimate now. Check its house details against the inspection report and floor plan. Ask for a quote for extended replacement cost coverage, including the price.

Senate Bill 876 was authored by Senator Padilla. Governor Newsom approved it on September 27, 2026, and it was filed with the Secretary of State that same day. It is Chapter 656, Statutes of 2026. The Department of Insurance calls it the Disaster Recovery Reform Act.

The bill does not change the number on your purchase contract into an insurance limit. It does not turn a home inspection into an insurance appraisal. It creates offers, disclosures, rebuild estimate requirements, and coverage rules that begin later.

The work you can do this week is more direct. Get the estimate. Read the assumptions. Compare them with what the house actually contains.

“Takes effect” and “operative” are different dates

The Department of Insurance says SB 876 takes effect January 1, 2027, while the chaptered text makes its new requirements operative January 1, 2028.

The Department of Insurance announcement dated September 29, 2026, says, “SB 876 takes effect January 1, 2027.” The bill’s Legislative Counsel’s Digest says, “This bill would make its provisions operative on January 1, 2028.”

Each new section added by the bill ends with this sentence: “This section shall become operative on January 1, 2028.”

A law can take effect on one date while its requirements become operative later. For a buyer binding a policy now, the date that matters for the new coverage requirements is January 1, 2028.

SB 1301, the roof-age nonrenewal law, was also signed on September 27, 2026, and also starts January 1, 2028. We covered that law in our article on SB 1301 and roof-age nonrenewal.

Do not wait for 2028 to inspect the insurance offer in front of you. The current rules already require useful information, and the declarations page already tells you where the rebuild number came from.

SB 876 will require a 50 percent extended replacement cost offer

Beginning January 1, 2028, an eligible residential property insurance applicant or insured must be offered extended replacement cost coverage of at least 50 percent above the policy limit for the primary dwelling.

New Insurance Code section 10103.2(a) says:

“A residential property insurance policy shall not be issued or renewed in this state unless the applicant or insured is offered extended replacement cost coverage, as defined in Section 10102, in an amount of no less than 50 percent of coverage above the policy limits for the primary dwelling. The offer shall be accompanied by the premium charge for this additional coverage.”

That is an offer. It is not automatic coverage. It comes with a price, and the buyer still decides whether to accept it.

For an example only, a policy with a $600,000 dwelling limit and 50 percent extended replacement cost coverage could allow up to $300,000 more for the dwelling. That would put the possible total at up to $900,000 if rebuilding costs that much. This is an example, not a typical figure.

If the applicant declines, the insurer must record the declination. The declarations page must identify “that extended replacement cost coverage of at least 50 percent was offered and is being declined.”

The requirement applies only to properties “eligible for replacement cost coverage.” Ask the insurer or broker whether the property and policy qualify.

SB 876 also adds a rule for additional living expense. A homeowners policy with a dollar limit on additional living expense cannot be issued or renewed unless the applicant is offered extended additional living expense, loss of use, or fair rental value coverage of at least 50 percent above that limit. The premium must be shown.

Additional living expense includes “temporary housing, furniture rental, food, transportation, storage, and boarding of pets.” Check that limit separately from the dwelling limit. A larger rebuild number does not answer the temporary housing question.

Building code coverage changes in 2028

The current rule requires a replacement cost policy to carry building code upgrade coverage of no less than 10 percent of the dwelling coverage policy limits.

Insurance Code section 10103(c) requires that coverage as additional coverage. It does not reduce the dwelling limit. A policy without it must state on the declarations page:

“THIS POLICY DOES NOT INCLUDE BUILDING CODE UPGRADE COVERAGE.”

From 2028, the required wording will cover codes and zoning laws “in effect at the time of rebuilding and required for rebuilding.” The current wording says “at the time of loss or rebuilding.”

A policy may limit coverage only for codes that “take effect more than three years after the date of loss and are required for rebuilding.”

SB 876 also addresses a total loss when the owner rebuilds or buys elsewhere. For policies issued, amended, or renewed on or after January 1, 2028, new Insurance Code section 2051.5(c) says the building code upgrade cost payable must include all costs that would have been incurred if the insured structure had been completely rebuilt at its original location.

Read the building code amount as its own line. Do not assume it is included in the dwelling limit or that the amount will automatically match the cost of rebuilding.

A policy bound in escrow already carries rebuild disclosures

The current law already requires information that a buyer can use before January 1, 2028.

When an insurer or agent does not offer at least 50 percent extended replacement cost, the applicant must receive a disclosure that those policies “may be available.” The disclosure must also provide the web address for the Department of Insurance’s Homeowners Coverage Comparison Tool.

The Homeowners Coverage Comparison Tool lets you “compare policies from different companies against other policies,” including the loss settlement basis. The disclosure carries its address, and your agent or broker can point you to it.

A replacement cost policy must include building code upgrade coverage of “no less than 10 percent of the dwelling coverage policy limits.” If the policy does not include it, the declarations page must carry the required warning.

Every declarations page must also carry this sentence:

“The limit of liability for this structure (Coverage A) is based on an estimate of the cost to rebuild your home, including an approximate cost for labor and materials in your area, and specific information that you have provided about your home.”

That sentence is the pivot for a buyer in escrow. You have owned the house for zero days. You may not know whether the insurer’s square footage, foundation, roof, garage, or interior assumptions describe the property accurately.

The California Residential Insurance Disclosure states, “The cost to rebuild your home is almost always different from the market value.” It also states, “Dwelling coverage limits do not cover the value of your land.”

The rebuild estimate should be adjusted for the features of the home, including “the square footage, type of foundation, number of stories, and the quality of the materials.” The disclosure encourages getting an estimate from the agent, broker, or insurer, or an independent appraisal from a local contractor, architect, or real estate appraiser.

It also warns about “demand surge” after a widespread disaster. Confirm coverage details with your insurance agent or broker.

The rebuild estimate must describe this property

California Code of Regulations, Title 10, section 2695.183, sets the estimate rules. The regulation has been operative since June 27, 2011.

The estimate must include the cost of labor, building materials and supplies, overhead and profit, demolition and debris removal, permits, and architect’s plans.

It must consider these property features:

  1. Type of foundation.
  2. Type of frame.
  3. Roofing materials and type of roof.
  4. Siding materials.
  5. Whether the structure is on a slope.
  6. Square footage of the living space.
  7. Geographic location.
  8. Number of stories and any nonstandard wall heights.
  9. Interior features and finishes, including the heating and air conditioning system, walls, flooring, ceiling, fireplaces, kitchen, and baths.
  10. Age or year built.
  11. Size and type of attached garage.

The estimate must be based on rebuilding “the single property being evaluated.” It cannot be based on tract building costs.

It “shall not be based upon the resale value of the land, or upon the amount or outstanding balance of any loan.” The loan amount and purchase price are the wrong numbers to insure to. The regulation forbids using land value or the loan as the basis for the estimate.

If a licensee communicates an estimate, the applicant must receive a copy. If the estimate is given by phone to an applicant, the copy must be mailed no later than three business days after the applicant agrees to buy the coverage.

The copy must itemize the cost elements and “identify the assumptions made” for each feature in the list above. If the estimate changes, the applicant must receive a copy of the revised estimate too.

The insurer is not required to set or recommend a policy limit. The buyer chooses the limit. The applicant may also get an estimate from an entity allowed to make one.

The inspection and floor plan show what the estimate must describe

The inspection report gives you a separate record of the physical features that affect the rebuild estimate.

The InterNACHI Standards of Practice, which Inspection.re works to, require the inspector to describe the type of roof-covering materials, type of exterior wall-covering materials, type of foundation, heating energy source and heating method, and cooling method. Those items overlap directly with the features listed in section 2695.183(a)(5).

Every Inspection.re inspection includes a LIDAR floor plan. The property “is re-measured using LIDAR technology for exact square footage and room dimensions.” The service also includes a Matterport 3D tour with inspection tags, drone roof imaging, FLIR infrared, a same-day report in 6 to 8 hours, and InterNACHI-certified inspectors. See what is included in an Inspection.re inspection.

The floor plan measures what is there. It does not decide what the county records or the insurer will accept. The inspection report is not a replacement cost estimate. Inspection.re does not prepare insurance estimates or set coverage limits. The report documents the property, while the insurer or other permitted estimator calculates the rebuild estimate.

The inputs are the same whether the house sits in Pacific Palisades, Sierra Madre, Orinda, or Malibu. The estimate still needs the actual square footage, foundation, roof, exterior walls, slope, stories, garage, systems, finishes, and other features.

Inspectors may document categories that a listing does not show clearly. Those can include a hillside lot or slope, an additional level, an added room or garage conversion, a second fireplace, a tile or slate roof instead of composition, or a raised foundation with crawl space.

The roof covering is one of the details that can be documented through drone imaging. See what drone roof inspection can show. The full report describes more of the property and its systems in the Inspection.re report overview.

Ask these seven questions before you bind coverage

The buyer and agent should raise insurance during the contingency period, not at the end of escrow. Insurance is usually bound before closing.

  1. Ask the insurer, agent, or broker for the written rebuild estimate and every assumption used to prepare it.
  2. Compare the estimate line by line with the inspection report and LIDAR floor plan. Check square footage, number of stories, foundation, roof covering, siding, slope, attached garage size, year built, fireplaces, heating and air conditioning.
  3. If a line is wrong, tell the agent or broker in writing and ask for a revised estimate. The regulation requires a copy of the revised estimate.
  4. Ask for a quote for 50 percent extended replacement cost coverage, including the premium. That offer is required under SB 876 starting January 1, 2028, but you can ask about the coverage now.
  5. Check the building code upgrade amount. Confirm whether it is at least 10 percent of the dwelling coverage limit under the current rule, and read the declarations page for the required warning if it is absent.
  6. Check the additional living expense, loss of use, or fair rental value limit. Ask what amount would apply to temporary housing, furniture rental, food, transportation, storage, and boarding of pets.
  7. Use the Homeowners Coverage Comparison Tool if the disclosure says 50 percent extended replacement cost “may be available.” Keep the estimate, quotes, questions, and answers in writing.

Bring up insurance early because an unaffordable or unavailable quote is a decision point. It may affect the purchase decision, the price, or whether the buyer continues. See what to do when insurance becomes a deal breaker, which also walks through the contract periods that set how long you have to decide.

Renewal estimates and disaster claims will add new duties

Starting January 1, 2028, an insurer providing replacement cost coverage must provide a rebuild estimate every other year at renewal, and the estimate must comply with the state’s estimate regulation.

The new rule also reaches California FAIR Plan policies if replacement cost coverage is available under the policy and the policy limit being offered or provided is less than the maximum combined policy limit available under the program. The FAIR Plan policy language matters, as discussed in this FAIR Plan smoke damage coverage article.

On the claims side, SB 876 requires a primary point of contact within 30 calendar days on a state-of-emergency claim. Insurers must submit disaster response plans before April 1, 2028. Penalties for unfair practices tied to a state of emergency increase to up to $10,000 per act, or $20,000 if willful.

These claims-side rules do not replace the work of checking the policy before closing. They address what happens after a covered loss and do not promise a claim outcome.

Insure the rebuild, not the price

The new 50 percent extended replacement cost offer becomes operative January 1, 2028. A buyer closing now cannot wait for it.

Ask for the written rebuild estimate and its assumptions. Compare the estimate with the inspection report and floor plan. Ask for the extended replacement cost quote and its price. Then check building code upgrade coverage and additional living expense coverage before binding the policy.

The purchase price and loan amount do not set the rebuild cost. Land value does not belong in the dwelling limit. The house details do.

For related reading, see the 2026 California wildfire insurance law roundup, the November 2026 appraisal changes, and California flood map changes for home purchases. The state’s insurance disclosure lists earthquake and flood as perils that can be bought as an endorsement or as a separate policy.

If you want to confirm what an inspection documents before you compare it with the insurance estimate, review the Inspection.re FAQ or call 1-888-88-INSP-9.

Share this article

Ready to Schedule Your California Inspection?

Same-day report · 3D virtual tour · Drone footage · Infrared scans · LIDAR floor plan

Schedule Inspection →

More from our Blog

CallSchedule